Crimping way UTP cable to the RJ-45 (Straight and Cross)

Crimping way to RJ45 UTP cable (Straight and Cross). After learning Various Computer Network Cable Lan, we will do the crimping of the UTP cable using RJ-45 connectors that can be used to connect the computer hardware.

nah, before we start, the materials to be prepared is utp cable, RJ-45 connectors and crimping pliers and better if you if there is Lan Tester to test the cable, if not, still can use other ways to test her.

TANG CRIMPING

KABEL UTP

LAN TASTER

RJ-45

UTP cable consists of two types, namely Straight and Cross, a straight cable is used to connect two different hardware such as connecting a PC to the Switch / Hub, and Cross cable is used to connect two pieces of the same hardware as from PC to PC, Laptop to Laptop .Cara crimping UTP cable to the RJ-45.

To make Straight cable, the arrangement of the colors used are:

The composition of colors on the tip 1 = White Orange, Orange, White, Green, Blue, White Blue, Green, White Chocolate, Chocolate

Arrangement of the same color on the tip end 2 1

To create a Cross cable, the arrangement of the colors used are:

The composition of colors on the tip 1 = White Orange, Orange, White, Green, Blue, White Blue, Green, White Chocolate, Chocolate

The composition of colors on the tip 2 is = White Green, Green, White Orange, Blue, White Blue, Orange, White Chocolate, Chocolate How crimping UTP cable to RG-45

STEP STEP STRAIGHT AND CROSS CABLE CRIMPING.

Crimping way UTP cable to the RJ-45

1. Peel the skin of wiring width of 2 cm.

2. Arrange neatly contained within the eight wires in accordance with drawings and explanations above.

3. Align the cables are still tangled.

4. Flatten the end of the cable by cutting it using crimping pliers.

5. After making sure the correct color sequence and the ends of the cables are flat, the input cable into the RJ-45 connector, make sure the cable ends to touch the tip of the RJ-45, and jepitlah use crimping pliers.

6. After completing both ends of the cable, using the test Lan tester, if all the lights are on, it means that the cable has been in the crimping properly and can be used.